1，Balance piston failure shutdown - 活塞平衡调整失败(数字模块和进出气压差问题)
2，Compressorinterlock failure – 压缩机程序互锁错误
3，Compressorstarting failure- Low motor Amps – 压缩机起动失败(起动电流过低)
4, Compressor stopping failure-motor Amps – 压缩机停止故障,不能自动停机(油泵或滑阀问题)
5，Compressorstarting failure- Aux. - 压缩机起动失败(辅助输入模板问题)
6，Compressoraux.failure – 压缩机辅助输入模板问题
7, Compressor Unload to unload –Alarm – 不能卸载(停机时滑阀不能退回到位)
8, Digital board 1(2,3,4) comm.fail-shutdown – 数字模板通讯故障
9, Analog board comm.fail –shutdown – 模拟板通讯故障
10，Auxiliary1(2,3,4,5,6,7,8)# alarm(shutdown) –辅助输入板故障
11，Dischargepressure sensor fault – 排气压力传感器故障
12, Discharge temperature sensor fault –排气温度传感器故障
13, False start failure –Aux. –起动故障(停机时滑阀不能退回到位,与辅助输入模板有关问题)
14, False start failure –Motor Amps -起动故障(停机时滑阀不能退回到位,与电机电流低有关问题)
15, Hight auxiliary analog 1(2,3,4,5,6,7,8,9)# alarm/shutdown –
辅助模拟输入板1(2,3,4,5,6,7,8,9)#输入值高过设置点故障
16, High discharge temperature alarm – 高排气温度报警
17，Highdischarge temperature shutdown –高排气温度停机
18, High discharge pressure alarm –高排气压力报警
19, High discharge pressure shutdown – 高排气压力停机
20，Higheconomizer alarm – 高经济器报警(10#模拟输入板问题)
21, High economizer shutdown -高经济器停机(10#模拟输入板问题)
22, low economizer alarm –低经济器报警(10#模拟输入板问题)
23, low economizer shutdown –低经济器停机(10#模拟输入板问题)
24, High entering process temperature alarm – 高输入工作温度报警
25, low entering process temperature alarm – 低输入工作温度报警
26，High enteringprocess temperature shutdown -高输入工作温度停机
27, low entering process temperature shutdown –低输入工作温度停机
28, High liquid level shutdown – 高液位停机
29, High motor current alarm – 高电机电流报警
30, low motor current alarm – 低电机电流报警
31, High motor current shutdown – 高电机电流停机
32, low motor current alarm – 低电机电流停机
33, High oil filter pressure alarm – 高油过滤器压力报警
34, High oil filter pressure shutdown -高油过滤器压力停机
35, High oil temperature alarm – 高油温报警
36, High oil temperature shutdown -高油温停机
37, High starting differential pressure – shutdown – 高起动压差停机
38，High suctionpressure alarm – 高吸气压力报警
39, low suction pressure alarm – 低吸气压力报警
40, High suction pressure shutdown – 高吸气压力停机
41, low suction pressure shutdown – 低吸气压力停机
42，Insufficientmain oil pressure shutdown – 喷油压力不够停机(滑阀大于50%时)
43, low auxiliary analog 1#(2,3,4,5,6,7,8,9) alarm/shutdown -辅助模拟输入板输入值低于设置点故障
44，low oilpressure alarm – 低油压力报警
45, low oil pressure shutdown –低油压力停机
46, low oil separator temperature alarm – 油分离器温度低报警
47, low oil separator temperature shutdown – 油分离器温度低停机
48, low oil temperature alarm – 低油温报警
49, low oil temperature shutdown – 低油温停机
50, low process temperature alarm – 低工作温度报警
51, low process temperature shutdown – 低工作温度停机
52, Missing oil pressure alarm – 油压低报警
53, Missing oil pressure shutdown – 油压低停机
54, Motor starter comm.fail-shutdown –电机起动通讯故障
55, Oil level shutdown –油位低停机
56, Oil log shutdown – 油记录错误(和油泵相关)
57, Oil pressure sensor fault - 油压传感器故障
58, Oil temperature sensor fault - 油温传感器故障
59, Separator temperature sensor fault - 油分离器传感器故障
60, Suction pressure sensor fault - 吸气压力传感器故障
61, Oil pump Aux. alarm - 油泵辅助输入模板故障警